Plasma Cylinder Bore

Plasme coated cylinder bore with honing marks - Digital Metrology Solutions

This is an example of plasma coated cylinder bore. The plasma porosity can be seen, as well as the cross-hatch pattern from the subsequent honing operations.

In Omnisurf3D you can use the Pit/Porosity Analysis (Tools > Pit/porosity Analysis) to explore the depths of the pores across the surface. Click and drag the blue, horizontal line to see the pores that are present at a given depth below the surface.

Plasme coated cylinder bore with honing marks - Pit/Porosity Analysis - Digital Metrology Solutions

 

Click the Table tab in the Pit/Porosity analysis to view the depth and area of all of the pits at the given depth.

Plasme coated cylinder bore with honing marks - Pit/Porosity Analysis - Digital Metrology Solutions

Measured via Zygo ZeGage Plus (10x)

Data source:  Digital Metrology Solutions (www.digitalmetrology.com)

Please log in below to download the datasets. If you’re new to the page, please take a moment to register here.


I forgot my password


 

How to cite

If you use this dataset, please reference it as follows:

Digital Metrology Solutions. “Surface Library.” Digitalmetrology, digitalmetrology.com/dataset/plasma-cylinder-bore. Accessed Oct 13, 2024.